Fluid Power Symbol


  • Max Flow

    : 6 lpm

  • Max Pressure

    : 350 bar

  • Cavity

    : NG3-Mini

  • Leakage

    : 0.3 mililitres/min (5 dpm)

Wandfluh poppet valves can be used anywhere absolutely leak tight closing functions are important. Completely sealed loading, gripping and clamping operations are all important functions which Wandfluh poppet valves can perform. Cartridge type poppet valves can be neatly accommodated in valve blocks. From a mechanical and functional point of view, poppet valves can replace slide valves at any time. NG3-mini valves are used where a light, compact unit is needed.

Poppet valve, flanged design NG3-Mini, available as a 2/2 or 3/2-way valve (normally open or closed) and as a 3/4-way valve (normally closed). The central functioning element of all directly controlled poppoet valves in the NG3-Mini series is the poppet valve cartridge NG3. See data sheet 1.11-2010. The solenoids correspond to VDE standard 0580. Important: When commissioning, the valve must be vented under pressure (max. 2 revolutions of screw E).

The valve is direct operated by a wet pin push type solenoid which in turn either opens or closes the poppet. The design of the poppet spool, which is equal in surface area on both sides and thus pressure balanced, means there are no undue opening and closing hydraulic forces. Due to this the oil flow through the poppet valve is possible in both directions. The valve is tight in both flow directions.